New method and treatment technique applied to interband transition in GaAs<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>P<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> ternary alloys

In this paper we presented a new method (Eigen-Coordinates (ECs)) that can be used for calculations of the critical points (CPs) energy of the interband-transition edges of the heterostructures. This new method is more accurate and complete in comparison with conventional ones and has a wide range of application for the calculation of the fitting parameters related to nontrivial functions that initially have nonlinear fitting parameters that are difficult to evaluate. The new method was applied to determine the CPs energies from the dielectric functions of the MBE grown GaAs_1−xP _x ternary alloys obtained using spectroscopic ellipsometry (SE) measurements at room temperature in the 0.5-5 eV photon energy region. The obtained results are in good agreement with the results of the other methods.     

Intercalation of graphite and hexagonal boron nitride by lithium

Although graphite and hexagonal form of BN (h-BN) are isoelectronic and have very similar lattice structures, it has been very difficult to intercalate h-BN while there are hundreds of intercalation compounds of graphite. We have done a comparative first principles investigation of lithium intercalation of graphite and hexagonal boron nitride to provide clues for the difficulty of h-BN intercalation. In particular lattice structure, cohesive energy, formation enthalpy, charge transfer and electronic structure of both intercalation compounds are calculated in the density functional theory framework with local density approximation to the exchange-correlation energy. The calculated formation enthalpy of the considered forms of Li intercalated h-BN is found to be positive which rules out h-BN intercalation without externally supplied energy. Also, the Li(BN)₃ form of Li-intercalated h-BN is found to have a large electronic density of states at the Fermi level and an interlayer state that crosses Fermi level at the zone center; these properties make it an interesting material to investigate the role of interlayer states in the superconductivity of alkali intercalated layered structures. The most pronounced change in the charge distribution of the intercalated compounds is found to be charge transfer from the planar σ states to the π states.     

Proton conducting composite membranes based on poly(1-vinyl-1,2,4-triazole) and nitrilotri (methyl triphosphonic acid)

Polymer electrolyte composite membranes based on poly(1-vinyl-1,2,4-triazole) (PVTRI) and nitrilotri(methyl triphosphonic acid) (TPA) were investigated. PVTRI was produced by free radical polymerization of 1-vinyl-1,2,4-triazole. The polymer PVTRI was doped with TPA at various molar ratios x=0.125, x=0.25, and x=0.5. The proton transfer from TPA to the triazole rings was proved with Fourier-transform infrared spectroscopy (FT-IR). Thermogravimetry (TG) analysis showed that the samples are thermally stable up to approximately 250 °C. DSC results illustrated the homogeneity of the materials as well as the softening effect of the dopant. Cyclic voltammetry results illustrated that the electrochemical stability domain of the dopant extends over 1.5 V. The maximum proton conductivity has been measured for PVTRITPA-0.25 as 8.5×10⁻⁴ S cm⁻¹ at 150 °C.     

Effects of Heavy Iodine Atoms and π-Expanded Conjugation on Charge Transfer Dynamics in Carboxylic Acid BODIPY Derivatives as Triplet Photosensitizers

Borondipyrromethene (BODIPY) chromophores are composed of a functional-COOH group at meso position with or without a biphenyl ring, and their compounds with heavy iodine atoms at −2, −6 positions of the BODIPY indacene core were synthesized. The photophysical properties of the compounds were studied with steady-state absorption and fluorescence measurements. It was observed that the absorption band is significantly red-shifted, and fluorescence signals are quenched in the presence of iodine atoms. In addition to that, it was indicated that the biphenyl ring does not affect the spectral shifting in the absorption as well as fluorescence spectra. In an attempt to investigate the effect of π-expanded biphenyl moieties and heavy iodine atoms on charge transfer dynamics, femtosecond transient absorption spectroscopy measurements were carried out in the environment of the tetrahydrofuran (THF) solution. Based on the performed ultrafast pump-probe spectroscopy, BODIPY compounds with iodine atoms lead to intersystem crossing (ISC) and ISC rates were determined as 150 ps and 180 ps for iodine BODIPY compounds with and without π-expanded biphenyl moieties, respectively. According to the theoretical results, the charge transfer in the investigated compounds mostly appears to be intrinsic local excitations, corresponding to high photoluminescence efficiency. These experimental findings are useful for the design and study of the fundamental photochemistry of organic triplet photosensitizers.     

Transition metal coordination chemistry ofN,N-bis(2-{pyrid-2-ylethyl})hydroxylamine

Although directly relevant to metal mediated biological nitrification as well as the coordination chemistry of peroxide, the metal complexes of hydroxylamines and their functionalized variants remain largely unexplored. The chelating hydroxylamine ligand N,N-bis(2-{pyrid-2-ylethyl})hydroxylamine can be readily generated via a solvent free reaction in high purity; however, the ligand is prone to decomposition which can hamper metal reaction. N,N-bis(2-{pyrid-2-ylethyl})hydroxylamine forms stable complexes with chromium(III), manganese(II), nickel(II), and cadmium(II) ions, coordinating in a side-on mode in the case of chromium and via the nitrogen in the case of the latter three metal ions. The hydroxylamine ligand can also be reduced to form N,N-bis(2-{pyrid-2-ylethyl})amine upon exposure to a stoichiometric amount of the metal salts cobalt(II) nitrate, vanadium(III) chloride, and iron(II) chloride. In the reaction with cobalt nitrate, the reduced ligand then chelates to the metal to form [N,N-bis(2-{pyrid-2-ylethyl})amine]dinitrocobalt(II). Upon reaction with vanadium(III) chloride and iron(III) chloride, the reduced ligand is isolated as the protonated free base, resulting from a metal-mediated decomposition reaction.     

Reactions of the Re(CO)3(H2O)3(+) synthon with monodentate ligands under aqueous conditions

The reactions of ammonia, pyridine (py), N-methyl imidazole (N-MeIm), tetrahydrothiophene (tht), and piperidine (pip) with Re(CO) 3(H 2O) 3 (+), 1 ( + ), were investigated employing aqueous conditions under atmospheric dioxygen. The reaction of [ 1]Br in aqueous ammonia led to [Re(CO) 3(NH 3) 3]Br ([ 2]Br) as the only product isolated. For the aqueous reactions of [ 1]Br with py, N-MeIm, and tht, mixtures of products are formed because of competition between the bromide and added ligand, even when the ligand is present in excess. Substitution of the PF 6 (-) anion for Br (-) leads to the clean formation of [Re(CO) 3L 3][PF 6] ([ 3][PF 6]-[ 5][PF 6]) for py, N-MeIm, and tht, respectively, as the only products observed. Reaction of [ 1][PF 6] with pip produces the dimeric species, (pip)(CO) 3Re(micro-OH) 2Re(CO) 3(pip), 6. Reactions of [ 1]Br were also performed in methanol for comparison purposes. The reaction with pip in this solvent led to the analogous dimer, (pip)(CO) 3Re(micro-OMe) 2Re(CO) 3(pip), 7; however, reactions with py, N-MeIm, and tht gave Re(CO) 3L 2Br, 8- 10, respectively, as the only products. The crystal structures of compounds [ 2]Br- 10 are reported.     

Effect of hexagonal boron nitride on poly(vinyl phosphonic acid) composite polymer electrolytes for fuel cells

In this work, hexagonal boron nitride nanoparticles were used as inorganic fillers, which increase the mechanical and thermal stabilities as well as the proton conductivity of the proton conducting composite membranes prepared by blending of poly(vinyl phosphonic acid) and hexagonal boron nitride. Thermo gravimetric analysis showed that the polymer electrolyte membranes are thermally stable up to 200°C. Scanning electron microscopy analysis indicated the homogeneous distribution of boron nitride nanoparticles in the polymer matrix. The crystallinity of the membranes was characterized by using X-ray Diffraction. X-ray patterns support semi-crystalline nature of the composite materials.     

Highly Flexible and Tailorable Cobalt-Doped Cross-Linked Polyacrylamide-Based Electrolytes for Use in High-Performance Supercapacitors

A novel hydrogel polymer electrolyte was prepared by incorporation of 1,4-butanediol diglycidyl ether (BG) to cross-linked polyacrylamide (PAM). The electrolyte (PAMBG) was modified with cobalt (II) sulfate with various doping ratios (PAMBGCoX) to increase the capacitance by increasing faradaic reactions. The supercapacitor device assembly was performed by using active carbon (AC) electrodes and hydrogel polymer electrolytes. The specific capacitance of the PAMBGCo5 device indicated 130 F g⁻¹, which is at least a seven-fold improvement due to the insertion of Co as a redox component. The electrolyte device, PAMBGCo5, displays superior performance having an energy density of 38 Wh kg⁻¹ at a power density of 500 W kg⁻¹. Additionally, with the same hydrogel, the device performed 10,000 galvanostatic charge-discharge cycles via retaining 91% of the initial capacitance. A cost-effective electrolyte, PAMBGCo5, was tested in a carbon-based supercapacitor under bent and twisted conditions at various angles, confirming the robustness of the device.     

Green synthesis of fluorescent carbon dots from Kumquat (Fortunella margarita) for detection of Fe3+ ions in aqueous solution

In this study, kumquat was first time used for synthesizing carbon dot structures (CDs) with the hydrothermal method. These newly synthesized CDs was characterized structurally and optically. The ion sensor application of the new CDs was carried out using 20 different metal ions. It was observed that CDs have high selectivity only for Fe³⁺ ions among the metal ions studied. Detection limit for Fe³⁺ ions was calculated as 0.70 µM. The results showed that these new CDs are highly selective against Fe³⁺ ions and have a very short response time such as 0.5 min. The Fe³⁺ ions selectivity of CDs was tested on real (tap water) samples. The results exhibited that this new CDs, obtained with green synthesis from Kumquat fruit without using chemical agents in one-pot simple and economical process, can be used as fluorometric sensor for detection of Fe³⁺ ions with high selectivity and sensitivity, low detection limit and rapid response time.